500-100000W Fiber laser electronic control and drive system solutions-manufacture,factory,supplier from China

Ultrasonic generator common failure and maintenance methodsUltrasonic generator is a kind of equipment that converts the mains power into the corresponding high-frequency alternating current of the transducer to drive the transducer to work. It is an important component of the high-power ultrasonic system. It can also be called electronic box, ultrasonic driving power supply and ultrasonic controller. Although the ultrasonic generator can also be called the ultrasonic drive power, but in fact, the ultrasonic generator is only a part of the ultrasonic drive power.

The control part of pulsed laser power supply mainly consists of signal source, signal processing and delay regulation, pulse power amplification, energy storage voltage control and other circuits. The main circuit structure of the pulsed laser power supply we developed adopts resonant switching technology, which can be closed when the current passes zero, effectively reducing the switching loss and improving the conversion efficiency.

Laser cutting machine equipment common faults and solutions1, boot without any response▶ Power fuse is burnt out: Replace the fuse.▶ Power input is normal: Check power input and make it normal.▶ Main power switch is damaged: Replace the main power switch.2, no laser output or very weak laser▶ Optical path offset: Carefully adjust the optical path.▶ Contaminated or damaged reflector lens: Clean or replace reflector lens.▶ Whether the focal length of the device is changed: readjust the focal length.▶ Focusing mirror is contaminated: Clean the focusing mirror.▶ Cooling water quality or temperatur

How to repair the failure of CO2 laser power supply?CO2 laser is widely used in laser engraving, laser cutting and other fields, mainly composed of luminescence system, motion system, control system. Next, our company will briefly introduce how to judge and troubleshoot the failure of CO2 laser power supply from the following two aspects.Laser has no laser output1. Check whether the laser tube itself is illuminated (test whether it is illuminated at the optical outlet of the laser tube). If it is illuminated normally, check whether the lens is damaged and the optical path is offset.2.

Laser operators should have the relevant technical knowledge of laser power supply system. If the large-scale laser power supply system has an emergency situation during operation, the laser operators should diagnose and repair the fault as soon as possible to ensure the normal operation of the laser system. There are many reasons for the power problems of laser power supply. Here, we will list the following five problems which are easy to appear in the operation of laser system for discussion.1.

Application of semiconductor laser power supplySemiconductor laser market leading fiber laser, gas laser, solid laser market for a while, and several other categories of laser market proportion is similar. However, since 2016, the market share of semiconductor laser has expanded rapidly, with an annual growth rate of 170%. In 2015 and 2015, semiconductor laser accounted for 50% of the total market share of laser. The market share of semiconductor laser power supply also expanded at the same time.

Precautions for using laser and colored light◇ In the course of optical treatment, the operator should minimize the potential risks to the person present and the possible side effects to the customer◇ During the course of treatment, unauthorized persons are forbidden to enterAll reflective materials and inflammable materials should not be placed in the treatment room, such as mirrors and reflective glass objectsCarbon dioxide extinguisher should be placed in the room◇ Beauty care center should keep the fire outlet unblockedDoors should be kept closed and Windows should be covered with light -

Design of a low power semiconductor laser driving power supplyWith the semiconductor in communication, measurement and control, medical, integrated optics and other technical fields of wide application, its attention is also increasing, for the design of a high precision, reliable performance, economic, durable driving power has become our current most urgent problem, because of the semiconductor laser "delicate" characteristics, the use of power must be in the performance and quality of strict control. Transfer characteristics of semiconductor lasersAt a certain temperature, wh

How to install laser engraving machineThe installation of laser engraving machine has the following three steps:1. Installation(1) Insert the control card into the microcomputer PCI slot, tighten the screws, and connect the data cable; Plug in the USB dongle and install the operating software and dongle driver.(2) Connect the laser tube water circulation tube with the anode and cathode conductor, and then put the laser tube clamp ring.

Distinguish different cosmetic optical instruments and their functionsThere are many different optical instruments on the market, which give off different frequency and characteristics of the radiation wave. We can basically tell by its wavelength, energy, output mode, etc.Ultraviolet lightUltraviolet light can be divided into ultraviolet A, ultraviolet B and ultraviolet C according to different wavelengths. Uv A has a wavelength between 315-400 nm.