DY series CO2 laser power supply

  • CHARACTERISTICS

    △ Flat structure design, lightweight, adopting a flat structure with an all aluminum casing design, which is more efficient than conventional electrical systems

    The source is 30% lighter in weight.

    △ Cutting and carving compatibility:

    Stable power, strong adaptability, fast response speed, suitable for cutting or carving; Simple control, can

    High reliability: high/low level control of laser start and stop;

    △ Simple laser power control:

    Laser power can be controlled using both analog signals 0-5V and 5V PWM signals.

    The power supply itself has an open circuit protection function:

    Safer to use and significantly extend the lifespan of the power supply;

    The power supply has a manual test button:

    Can quickly diagnose faults on site for easy maintenance;

    The power supply is equipped with a working indicator light for easy troubleshooting.

    There are two installation methods, which can be installed horizontally or vertically to save space.


  Contact Now
Product Details

Product Features

dy.jpg

CHARACTERISTICS

△ Flat structure design, lightweight, adopting a flat structure with an all aluminum casing design, which is more efficient than conventional electrical systems

The source is 30% lighter in weight.

△ Cutting and carving compatibility:

Stable power, strong adaptability, fast response speed, suitable for cutting or carving; Simple control, can

High reliability: high/low level control of laser start and stop;

△ Simple laser power control:

Laser power can be controlled using both analog signals 0-5V and 5V PWM signals.

The power supply itself has an open circuit protection function:

Safer to use and significantly extend the lifespan of the power supply;

The power supply has a manual test button:

Can quickly diagnose faults on site for easy maintenance;

The power supply is equipped with a working indicator light for easy troubleshooting.

There are two installation methods, which can be installed horizontally or vertically to save space.

2、 Application Fields

Applied to CO2 laser engraving machines and laser cutting machines with special requirements for installation height and weight,

Laser marking machine, laser cutting die machine.


product parameters:

Project

Dy10

 Dy13

Dy20

Input voltage

AC220V (110V customizable)

Communication frequency

47-440HZ

Maximuminput power

500w

600w

750w

Maximum input current

2.3A

2.7A

3.5A

Maximum output voltage

35KV

40KV

50KV

Maximum output current

25mA

32mA

38mA

Efficiency

90% (at full load)

Mean time between failures

≥ 10000 hours

Response speed

≤ 1ms (the time from the switch signal to the output current rising to 90% of the set current)

Voltage resistant

input-output, input chassis: AC 1500v 10mA 60s; Connect the output negative pole to the casing

Control interface

TTL level switch control, effective level can be selected high or low (see control terminal instructions for details)

Operating temperature

(-10~40) ℃, relative humidity: ≤ 90%

Cooling method

forced air cooling

Matching laser tube power

50-80w

90-100w

100-150w

Dimensions

198*159*85

270*163*85

313*200*82

Weight (KG)

1.75KG

2KG

 

3.14KG

Shell color

Blue



Leave your messages
x
x

Submitted successfully

We will contact you as soon as possible

Close