fiber laser rust removal-manufacture,factory,supplier from China

Application of semiconductor laser power supplySemiconductor laser market leading fiber laser, gas laser, solid laser market for a while, and several other categories of laser market proportion is similar. However, since 2016, the market share of semiconductor laser has expanded rapidly, with an annual growth rate of 170%. In 2015 and 2015, semiconductor laser accounted for 50% of the total market share of laser. The market share of semiconductor laser power supply also expanded at the same time.

Mode of operation of laserThe laser with different wavelength and different output mode will be absorbed by different tissues or substances after entering the skin and thus produce different action modes. These tissues or substances are called Chromophore.Photothermal action refers to the absorption of laser light into the skin by specific pigment groups and then converted into heat energy. Depending on the duration of the laser pulse and the heat dissipation time of the skin tissue, the heat may spread to the surrounding tissues and cause a wide range of heating (e.g.

The principle of laser generationLASER is written as "Light Amplification by Stimulated Emission of Radiation", which means that by the principle of "excitation emission", the amplification of light waves is generated, which is called "laser". The motion state of electrons can be divided into different energy levels. When electrons transition from high energy level to low energy level, they will release electromagnetic waves of corresponding energy (the so-called spontaneous radiation).

As early as 1983, a scientific paper posted by way of two scholars, Anderson and Parrish, proposed "selective photothermal decomposition". This is a very necessary thought for the improvement and software of laser in dermatology.

Selective photothermal decomposition(Selective Photothermolysis)As early as 1983, a scientific paper published by two scholars, Anderson and Parrish, proposed "selective photothermal decomposition". This is a very important concept for the development and application of laser in dermatology.

How to prolong the service life of laser tube1 laser engraving machine, cutting machine in the use of laser tube, need to pay attention to the best use of pure cooling water, and keep the water temperature below 25℃.2. Summer temperature is high, it is necessary to pay attention to frequently change the cooling water, found that the temperature is too high, need to stop and rest and replace the cooling water; Winter temperature is low, the machine after the completion of the work, need to put the laser tube internal cooling water, to avoid the laser tube is frozen cracked.3.

How to prolong the service life of laser tube1 laser engraving machine, cutting machine in the use of laser tube, need to pay attention to the best use of pure cooling water, and keep the water temperature below 25℃.2. Summer temperature is high, it is necessary to pay attention to frequently change the cooling water, found that the temperature is too high, need to stop and rest and replace the cooling water; Winter temperature is low, the machine after the completion of the work, need to put the laser tube internal cooling water, to avoid the laser tube is frozen cracked.3.

Why the laser is weak or has no laser outputWhether the focusing mirror is contaminated: Clean the focusing mirror.Whether the focal length of relief engraving machine equipment changes: readjust the focal length.Whether the optical path is offset: Adjust the optical path carefully.Whether the reflector is contaminated or damaged: Clean or replace the reflector.Whether the laser power supply is powered on: Check the power supply loop of the laser power supply to make it normal.Whether the laser tube is damaged or aged: Replace the laser tube.Whether the laser power supply is damaged: Replace t

Precautions for using laser and colored light◇ In the course of optical treatment, the operator should minimize the potential risks to the person present and the possible side effects to the customer◇ During the course of treatment, unauthorized persons are forbidden to enterAll reflective materials and inflammable materials should not be placed in the treatment room, such as mirrors and reflective glass objectsCarbon dioxide extinguisher should be placed in the room◇ Beauty care center should keep the fire outlet unblockedDoors should be kept closed and Windows should be covered with light -

　　Hand-held laser marking machine is an advanced laser equipment, which is widely used in various industries. It uses laser technology for lettering, marking and engraving, which has many unique advantages. This article will introduce the advantages of hand-held laser marking machine in detail, and its application in different fields.　　The first advantage of handheld laser marking machine is high precision. It is focused by a laser beam and finely imprinted on the surface of various materials.