PD optical power detection module-manufacture,factory,supplier from China

Distinguish different cosmetic optical instruments and their functionsThere are many different optical instruments on the market, which give off different frequency and characteristics of the radiation wave. We can basically tell by its wavelength, energy, output mode, etc.Ultraviolet lightUltraviolet light can be divided into ultraviolet A, ultraviolet B and ultraviolet C according to different wavelengths. Uv A has a wavelength between 315-400 nm.

Optical terms for cosmetic instrumentsA photon is an elementary particle, a quantum of electromagnetic radiation. In quantum field theory, it's the force carrier that transmits the electromagnetic force.Light spots/spots are few and far betweenLight spot is the contact point of light contact skin, different instruments have different light output size and shape. Such as color light instrument contact point is generally rectangular, size marked as long x wide (for example: 10mm x 25mm). Generally, the laser output is a dot, and the size is marked as the diameter (e.g., 3mm, 8mm, etc.).

A photon is an fundamental particle, a quantum of electromagnetic radiation. In quantum subject theory, it is the pressure provider that transmits the electromagnetic force.Light spots/spots are few and a ways betweenLight spot is the contact factor of mild contact skin, distinctive units have specific mild output measurement and shape.

Power supply precautions and fault detection methods of laser cutting machineLaser cutting machine power use precautionsLaser cutting machine in the process of use, to the various components of the equipment for good maintenance, to ensure the normal operation of the machine. Laser power supply is one of the most important parts in laser cutting machine equipment, improper use is easy to cause damage to the power supply, affect the normal production.

Laser power supply is the energy of laser, it provides pumping energy to laser, control laser output strength and repetition frequency. Therefore, laser power supply is an essential part of laser. Its power and stability have direct influence on the corresponding performance of laser. The current output of a power box is designed according to the requirements of the pump module.

Laser cutting machine equipment common faults and solutions1, boot without any response▶ Power fuse is burnt out: Replace the fuse.▶ Power input is normal: Check power input and make it normal.▶ Main power switch is damaged: Replace the main power switch.2, no laser output or very weak laser▶ Optical path offset: Carefully adjust the optical path.▶ Contaminated or damaged reflector lens: Clean or replace reflector lens.▶ Whether the focal length of the device is changed: readjust the focal length.▶ Focusing mirror is contaminated: Clean the focusing mirror.▶ Cooling water quality or temperatur

Why the laser is weak or has no laser outputWhether the focusing mirror is contaminated: Clean the focusing mirror.Whether the focal length of relief engraving machine equipment changes: readjust the focal length.Whether the optical path is offset: Adjust the optical path carefully.Whether the reflector is contaminated or damaged: Clean or replace the reflector.Whether the laser power supply is powered on: Check the power supply loop of the laser power supply to make it normal.Whether the laser tube is damaged or aged: Replace the laser tube.Whether the laser power supply is damaged: Replace t

How to use high voltage power supply to detect high voltage cablesTo ensure the normal and safe use of high-voltage cables, check the cable inlet before or after using them for a period of time. The test includes determining whether the main insulation is damp or aging, and checking whether there are defects in the main insulation of the cable after the voltage test. High voltage power supply is the main tool used for voltage resistance and insulation detection of cable.The source of Radium specially produced a power supply type for the high voltage test of power supply :HY-12KV and HY-32KV.

How to repair the failure of CO2 laser power supply?CO2 laser is widely used in laser engraving, laser cutting and other fields, mainly composed of luminescence system, motion system, control system. Next, our company will briefly introduce how to judge and troubleshoot the failure of CO2 laser power supply from the following two aspects.Laser has no laser output1. Check whether the laser tube itself is illuminated (test whether it is illuminated at the optical outlet of the laser tube). If it is illuminated normally, check whether the lens is damaged and the optical path is offset.2.

Design and implementation of semiconductor laser power supplyIn order to improve the stability of the optical power output of the semiconductor laser and ensure the safe and reliable operation of the laser, the semiconductor laser power supply can be designed according to the following introduction. The main circuit of driving power adopts synchronous DC/DC mode, which has high output efficiency. The driving circuit can generate 200kHz trigger pulse, which can reduce the ripple of output current and ensure the stability of the output power of the laser.