What is the Conventional Voltage of Portable Laser Marking Machine?

　　Portable laser marking machine is a device that uses laser technology to marking, which is usually used to engrave text, patterns, logo on the surface of various objects. It has the feature of simple operation, flexible operation, good engraving effect, and is widely used in jewelry processing, crafts, mold processing, woodworking, leather processing, paper-cut engraving and other fields. So what is the conventional voltage of the portable laser etching machine? This article will introduce relevant knowledge for you.

　　Conventional voltage of Portable laser marking machine

　　Portable laser marker are usually powered by DC power, and their voltage plays a crucial role in their operation. Under normal circumstances, the conventional voltage of the portable laser marking machine is 12V, but the specific voltage size still needs to be adjusted according to the power size of the equipment. Therefore, its voltage can be subdivided into the following types:

　　1. Low pressure mode

　　In low-voltage mode, the voltage of the portable laser marking machine is about 5V, which is generally used for processing smaller objects, such as watches, bank cards, crafts, and so on, and its power is relatively small.

　　2. Medium pressure mode

　　In the medium voltage mode, its voltage is about 9V, which can adapt to the processing of large objects, and the power is relatively high, which can be applied to the processing of some large workpieces, steel plates, etc.

　　3. High pressure mode

　　In the high-voltage mode, the voltage of the portable laser marking machine is generally above 12V, which is the most widely used mode on the market at present, and the high voltage can stimulate the laser faster and improve the processing efficiency of the equipment.

　　It should be noted that the voltage of the portable laser marking machine can be adjusted, but the size of the voltage must be gradually increased when adjusting, so as not to harm the circuit or laser. There are some portable laser marker can be charged by an externally provided power supply (such as a mobile phone charger), while also providing power to the device while charging, in which case the voltage of the device will also be guaranteed.

　　Epilogue

　　In summary, the conventional voltage of the portable laser etching machine is generally 12V, but the specific voltage still needs to be adjusted according to the power of the equipment. When regulating the voltage, it must be gradually adjusted, and it is not appropriate to over-adjust the voltage, so as not to harm the circuit or laser. In addition, when using portable laser marking machines, remember to understand and follow the relevant safety operating procedures to ensure the normal operation of the equipment.