LME series dot matrix medical laser power supply

Multi-function integration: laser power supply, galvanometer drive power supply, water pump drive power supply, built-in air pump and drive, simplify the machine instrument connection, reduce interference, increase reliability, etc.
High degree of intelligence: with laser energy feedback function, precise control of laser output power. Intelligent air pump and water pump control, stop the operation of air pump and water pump when idle, reduce noise, improve the life of air pump and water pump.
Better coordination with radium source special machine control system, stronger function (need to buy separately)
Various working modes are optional: the power supply can support continuous, single, pulse and other working modes, with strong practicability.
Strong specificity: low power control, stable, accurate power output.
It has the characteristics of small size, light weight and easy installation.
Simplify on-site maintenance: Built-in detection buttons simplify on-site fault diagnosis and maintenance.
Power supply with short time open circuit protection function: effectively increase the safety of beauty equipment, longer service life.
The product complies with the standards of medical electrical equipment YY0505-2012 or IEC60601-1-2.

Contact Now

Product Details

Product Features

Multi-function integration: laser energy supply, galvanometer power strength deliver, water pump drive power supply, integrated air pump and drive, simplify the system instrument connection, reduce interference, increase reliability, etc.
High degree of intelligence: with laser energy feedback function, precise control of laser output power. Intelligent air pump and water pump control, stop the operation of air pump and water pump when idle, reduce noise, improve the life of air pump and water pump.
Better coordination with radium source special machine control system, stronger function (need to buy separately)
Various working modes are optional: the power supply can support continuous, single, pulse and other working modes, with strong practicability.
Strong specificity: low power control, stable, accurate power output.
It has the characteristics of small size, light weight and easy installation.
Simplify on-site maintenance: Built-in detection buttons simplify on-site fault diagnosis and maintenance.
Power supply with short time open circuit protection function: effectively increase the safety of beauty equipment, longer service life.
The product complies with the standards of medical electrical equipment YY0505-2012 or IEC60601-1-2.

Field of Application

Medical cosmetology dot matrix instrument, laser private therapeutic instrument

product parameters

model	LME5C-S						LME5C
input voltage	AC90-264V						AC220
Enter the AC frequency	47--63Hz
leakage current	Less than 0.4mA / 250VAC
Maximum input power	420W						220W
Maximum input current	5A (at AC90V)						2A (at AC180V)
maximum output voltage	25KV	24V	-24V	15V	-15V	5V	DC 25KV
maximum output current	20mA	3A	0.5A	1A	0.5A	2A	DC 20mA
Pump control parameters	24V 2A						not have
Built-in gas pump parameters							not have
productiveness	90% (when fully loaded)
mean free error time	At 50,000 hours
response speed	1mS (from switch signal to output current to 90% of set current)
withstand voltage	Input-Output, Input-Case: AC1500V 5mA 60s;
service environment	Operating temperature (-10~40) ℃, relative humidity: 90%
Cooling form	air blast cooling
Overall dimensions (mm)	3209795						17616997
case	All aluminum case						Iron spray molding machine shell
weight (Kg)	2.1						1.6