Laser engraving machine use precautions

Laser engraving machine use precautions

1. When using automatic focal length, it is necessary to pay attention to whether the automatic focal rod is fastened. If the automatic focal rod is loose, it will cause the top of the workbench to the laser.

2. When laser engraving machine is working, it is forbidden to open the boot cover.

3. Open the smoke exhaust and smoke blowing equipment during processing.

4, processing wood, paper, must pay attention to the processing speed to avoid fire.

5. Primary users should first conduct red light positioning when carrying out irregular processing.

6, processing thin wood, volatile materials, should pay attention to the amplitude of the water product adjustment to the minimum 1mm.

7. When cutting and processing, the workpiece should be more than 2cm away from the workbench.

8. Cleaning the reflective lens and focal length lens: hold the reflective lens with two fingers, and clean the lens with the camera lens cleaning paper with the other hand.

9, engraving amount of files, the resolution should be adjusted higher, engraving point Chen document, the resolution should be lowered.