Why the laser is weak or has no laser output

Why the laser is weak or has no laser output

Whether the focusing mirror is contaminated: Clean the focusing mirror.

Whether the focal length of relief engraving machine equipment changes: readjust the focal length.

Whether the optical path is offset: Adjust the optical path carefully.

Whether the reflector is contaminated or damaged: Clean or replace the reflector.

Whether the laser power supply is powered on: Check the power supply loop of the laser power supply to make it normal.

Whether the laser tube is damaged or aged: Replace the laser tube.

Whether the laser power supply is damaged: Replace the laser power supply.

Tombstone engraving machine machine temperature is too high:

1. Turn off the machine to let the temperature drop;

2. Ventilation to enhance the heat dissipation of the machine;

3. Adjust the ambient temperature

Whether the cooling water circulates: dredge the cooling water channel.

Whether the cooling water quality or temperature is normal: replace the clean cooling water to make its temperature reach the normal value.

X/XA series CO2 laser power supply features

1, strong versatility: small size, light weight, different power supply installation port is consistent, easy to install and replace, a wide range of applications, best-selling at home and abroad.

2, good compatibility: can match the vast majority of domestic and foreign 30W-150W CO2 laser.

3. XA Series:

(1) Its own LCD screen: digital display current size, light indication, light signal, water protection signal can indicate normal signal and fault, integrated potentiometer can manually adjust the current.

(2) The mounting hole size is the same: the LCD screen and the original pointer ammeter opening size is the same, do not need to open a separate hole.

4, laser equipment safety is higher: with open circuit protection function, significantly extend the life of the power supply.

5, laser power control is simple: 0~5V analog signal control, also available 5V PWM signal control.

6, cutting machine and engraving machine compatible: cutting power is sufficient, fast speed; Engraving, marking effect is good, engraving bottom smooth.

7, the power supply itself with manual light test function, convenient customer on-site maintenance.

8, with the status indicator light, fault judgment is easy.